The Sediso Smart Tag series is unique in its kind and consists of a series of tags that are additionally protected in addition to the usual RF and AM security. Standard tags can easily be opened in the store by professional thieves with a magnet. The Smart Tag alarm goes off immediately when disconnected and can only be turned off with a special infrared remote control.
The Clamp Smart Tag is the ideal security solution for expensive products such as handbags, shoes and clothing. It clings to the product without damaging it. No matter which product you want to protect, we have a solution for almost everything.
- Electronic protection of expensive products
- Cheap and easy installation
- Alarm goes off as soon as the Clamp is opened
- Alarm goes off when the cable from the recoiler is cut
- Alarm goes off through the detection gates (8.2 Mhz or 58 Khz)
- Alarm goes off as soon as a (strong) magnet is used to unlock the recoiler cable
- The Clamp Smart Tag is equipped with 95 db alarm volume
- The Clamp Smart Tag is equipped with a recoiler with alarm function
- The Clamp Smart Tag is equipped with a replaceable battery
- Control via infrared remote control
- NL manual
The unique Sediso Clamp Smart multi alarm tag has been specifically developed to protect expensive goods such as shoes, jackets, bags and other luxury goods against theft. The clamp is clamped to the product like a clothespin. The product will not be damaged. The tag features the following alarm systems:
- Clamp protection; the alarm will go off as soon as the Clamp is removed from the product. This can only be turned off using the IR remote control.
- Cable protection: as soon as the cable of the recoiler is cut, the 95 dB alarm is triggered.
- Cable unlocking protection: as soon as the cable from the recoiler is disconnected by means of a standard magnet, the alarm will go off. This can only be turned off by using the infrared + magnet remote control.
- Location protection by means of a recoiler with alarm; if it is removed from its place, the alarm will go off.
- Detection port security; the tag is equipped with AM or RF ( 8.2 Mhz or 58 Khz) security
The Sediso Clamp Smart Tag with location function comes with a recoiler with alarm so that the product is protected on the spot itself becomes and cannot be taken. The wire of the recoiler is 130 cm long and is connected to the Clamp Smart Tag. The recoiler is glued and / or screwed on. As soon as the cable is cut, the recoiler is removed from its place or the wire is disconnected by means of a "normal" magnet, the alarm will sound.
The Sediso Clamp Smart Tag is 9.0 x 2.4 x 2.7 / 3.1 cm and is equipped with a sensor.
The recoiler is 4.5 x 4.5 x 2.4 cm and has a wire with a length of 130 cm. The recoiler comes with a thread stopper to prevent tension on the tag.
The CR1632 button cell battery of the Clamp tag is easy to replace. This is only available through a screw on the inside. The standby time is approximately 2 years. As soon as the battery needs to be replaced, the tag gives both light and sound warnings.
- Clamp Smart Tag multi alarm tag
- Recoiler with alarm function
- Magical + IR release (EAS051R)