Sediso mechanical pull box recoiler square with roll stop customised

Mechanical recoilers can be used to protect all kinds of products against accidental theft or loss.

The mechanical display recoiler rectangular with roll stop is available in black or white plastic. The cable can come out of the recoiler in 4 different places. The recoiler can be secured to the surface using 4 screws. By pulling the cable out a little and letting it spring back, it stops. By pulling it again he rolls in again. The stop can be activated at any length.

The dimensions of the recoiler are 7 x 4.5 x 2.4 cm. The standard cable diameter is 1.2 mm. Other diameters are 0.6 - 0.83 and 1.5 mm. The standard length is 96 cm and can be adjusted to a maximum of 300 cm. A plastic cable stopper is only suitable for the 1.2mm cable.

The connection is variable (see images and corresponding description):

• L02 wire loop with magnetic release and the size of which can be determined by means of an Allen key
• Q wire loop, the size of which can be determined by means of an Allen key (included)
• O fixed size wire loop
• B metal eye
• RJ12 plastic RJ-12 connection
• F round flat plastic plate (2.9cm) with double-sided tape
• F02 rectangular flat plastic plate (2.5 x 1.5 cm) with double-sided tape
• F03 rectangular flat metal plate (3.5 x 2.2 cm) with double-sided tape
• F05 ditto type Q incl. rectangular flat metal plate with screw hole (3 mm) and double-sided tape (4.8 x 1.8 cm)
• Y02 round plastic white / black plate (3.1 cm) with screw hole (6 mm), 2 holes for a tie wrap (4 mm) and double-sided tape
• Y03 round plastic black plate (2.9 cm) with screw hole (7mm), 2 holes for a tie wrap (4mm) and double-sided tape
• Y05 round plastic black / white plate (3.8 cm) with double-sided tape and 2 tie wrap holes (3 mm)

For this product there is a minimum order quantity of 10 pieces. A sample is available on request.