The Sediso Smart Tag series consists of a series of tags that are additionally protected in addition to the usual RF and AM security. For example, the Smart Tags are equipped with an Infra Red (IR) receiver and a private alarm system that is powered by a replaceable button cell battery.
If the Smart Tag is disconnected by a standard magnet, the alarm will go off. The Smart Tags can only be unlocked safely by using the encrypted IR remote control.
The difference between the Sediso Security Tape + Smart Tag and the Security Tape Smart Tag is that the + tag also triggers the tag itself as soon as it passes through the AM gates. p >
The Sediso Security Tape + Smart Tag box security black is a fast and cheap way to protect expensive products in boxes against theft. The base plate is glued to the box to be secured. Then the security tape is glued horizontally from the base plate to the box. Optionally, this can also be done vertically. As a last step, the Smart Tag is clicked on the base plate and activated.
The alarm goes off:
- When the security tape is cut or cut somewhere
- When the Security Tape + Smart Tag goes through an RF or AM port (the alarm of the gates)
- When the Security Tape + Smart Tag goes through an AM port (the alarm of the tag itself)
- If a normal magnet without IR is used to disconnect the Security Tape Smart Tag
By using the magnetic release with IR signal, the Security Tape tag can be unlocked and deactivated. The security tape and base plate remain on the product. The Security Tape Smart Tag can be reset and used. The Security Tape Smart Tag is powered by a CR1632 button cell and can be easily replaced. The standby time is approximately 2 years.
As soon as the alarm is activated, a red LED light on the top flashes every 20 seconds. The Security Tape Smart Tag box security can be applied to any desired length. The diameter of the tag is 5 cm.